Reviewed by the Texas Roof Pros teamPublished Last updated
Metal roofing in Lubbock comes in two main types: standing seam, with hidden fasteners and raised seams, and exposed-fastener panels common on shops and barns. Many metal products carry a UL 2218 Class 4 impact rating that can earn a Texas insurance credit, but hail can still leave cosmetic dents, so read your policy first.
Metal is common on newer and rural properties across West Texas, and for good reason: it sheds wind well when fastened correctly, reflects sun, and many products carry the top impact rating. It also has trade-offs the sales pitch skips, including dents, fastener upkeep and how your policy treats cosmetic damage.
Building new? Metal fits roof installation for new homes and shops just as well as a re-roof.
Is a Metal Roof Right for Your Property?
Repeated hail re-roofs
If your shingle roof has been replaced after storms more than once, an impact-rated metal roof resists the punctures and fractures that end a shingle roof, even when it dents.
A shop, barn or carport to cover
Exposed-fastener panels are a practical, fast-installing choice for outbuildings, and a matching color ties them to a metal roof on the house for a consistent look across the property.
An attic that bakes all summer
Light-colored and reflective metal finishes bounce back more sun than dark shingles, which can ease the heat load on the attic and the AC through long West Texas summers.
Rust or backed-out screws on old metal
On older exposed-fastener roofs, washers dry out and screws back out as panels expand and contract. Rust at fasteners, laps or cut edges means maintenance or new panels.
Plans to stay put
Metal usually costs more up front than asphalt shingles, so it makes the most sense when you'll own the home long enough to benefit from its durability.
How a Metal Roof Goes On in West Texas
Choose the system and finish
We compare standing seam and exposed-fastener panels, gauge, color and impact rating. Ask your agent how your policy treats both Class 4 ratings and cosmetic dents before ordering.
Prepare the deck
On a house, the old roof usually comes off so the decking can be checked. Installing over existing shingles is sometimes possible; check local code and the panel maker's instructions first.
Underlayment and trim
High-temperature synthetic underlayment goes down, then eave trim, drip edge and valley flashing. Correct trim and closures keep wind-driven rain and South Plains dust out of the seams.
Panels and fastening
Panels go on square to the eave, fastened to the manufacturer's pattern for wind uplift. Standing seam clips let panels move with heat, and exposed screws are driven snug so washers seal.
Ridge, penetrations and walkthrough
Vented ridge closures, pipe flashings made for metal and sealed transitions finish the roof. We walk it with you and explain what fastener maintenance looks like going forward.
What Affects the Cost of a Metal Roof in Lubbock?
Metal roof pricing varies more than shingle pricing because the systems differ so much. These factors carry the most weight.
Panel system
Standing seam with concealed clips takes more labor and material than exposed-fastener panels.
Gauge and finish
Thicker metal resists dents better, and premium finishes hold color longer in strong sun.
Impact rating
Class 4 panels can qualify for an insurance credit; ask your agent what yours offers.
Tear-off or overlay
Removing shingles adds labor and disposal; going over them, where allowed, changes the prep.
Roof shape
Hips, valleys, dormers and penetrations mean more custom trim and flashing.
Call to discuss your metal roof, from panel type to color, for your home or shop.
Does hail damage a metal roof?
Large hail can dent a metal roof, but a Class 4 rated panel is built to resist the cracks and punctures that let water in. Many dents are cosmetic rather than functional. Some Texas policies limit coverage for cosmetic damage to metal roofs, so read your policy or ask your agent before choosing metal in Lubbock.
Functional damage means the panel no longer keeps water out: punctures, split seams or fasteners knocked loose. Cosmetic damage is dimpling that looks bad but doesn't leak. Our guide to signs of hail damage on a roof shows what to look for on metal.
Standing seam vs. exposed-fastener panels
Standing seam panels lock together at raised seams over hidden clips, so no screws pierce the roof surface and panels can slide slightly as they heat and cool. Exposed-fastener panels are screwed through the face and install faster, which suits shops and barns, but every screw has a washer that will need attention.
Is a metal roof loud in the rain?
A metal roof on a home is usually not much louder than shingles in the rain. The tin-roof racket people remember comes from panels over open framing on barns. On a house, solid decking, underlayment and attic insulation sit under the metal and absorb most of the sound before it reaches you.
Metal for homes, shops and bigger buildings
We install metal as part of a full roof replacement in Lubbock, on shops and barns, and on larger buildings through commercial metal roofing. Prefer shingles? See Class 4 asphalt shingle roofing and our comparison of metal vs. asphalt shingles in Texas. We work on homes and shops across Lubbock and in the Midland area, where NWS storm data recorded baseball-size hail in August 2013. Call (806) 249-0342 to talk through your metal roofing project.
Metal Roofing FAQs
Can a metal roof go over my existing shingles?
Will insurance cover hail dents on a metal roof?
How often do exposed fasteners need attention?
Does a metal roof keep a house cooler?
Related Roofing Services
Roof Replacement
Full tear-off replacements with a decking check, new underlayment, drip edge and ventilation, plus Class 4 shingle or metal options built for South Plains hail and wind.
Asphalt Shingle Roofing
3-tab, architectural and Class 4 impact-resistant shingles installed with starter strips, correct nailing and balanced ventilation, plus the TDI certificate of installation for insurance credits.
Commercial Roofing
Repairs, replacements, coatings and maintenance plans for retail strips, offices, churches, warehouses and metal buildings, scheduled around your business hours to keep disruption low.
Roofing Guides for Homeowners
Metal Roof vs. Asphalt Shingles in Texas Heat and Hail
Both metal and asphalt shingles come in UL 2218 Class 4 versions. See how they really compare on West Texas hail, heat, wind, noise, insurance credits and curb appeal, plus a quick decision guide.
8 Signs of Hail Damage on Your Roof (and What Isn't Hail)
Bruised shingles, dented gutters and cracked flashing are classic hail tells, but blistering and old age can look similar. Here are eight signs to check from the ground, plus what usually isn't hail.
How Much Does a Roof Replacement Cost in Texas? 9 Factors That Set the Price
No honest roofer can price your roof from a blog post. Here are the nine factors that actually set a Texas roof replacement price, plus how to compare written estimates line by line.
Metal Roofing Across West Texas
Metal Roofing is available in all three of our service areas. See local hail history and permit notes for roofing in Lubbock, TX, roofing in Abilene, TX, and roofing in Midland, TX.